Modern Technology is used for designing pellet mills for accurate and maximum output, Pellet diameter ranges from 2mm to 15mm Capacity vary with material characteristics and other factors. Pellet mill supported by our efficient spares service division which guarantees quick supply of quality product of any component form DIES, PRESS ROLL, and KNIVES to even the smallest bolt with reasonable cost.
SR.NO | Model | Capacity | POWER REQUIREMENT |
1 | PMI-235 | 0.7 TO 0.8 TPH | 30 Hp Main Motor |
2 | PMI-300 | 1.5 TO 2.0 TPH | 50 HP Main Motor |
3 | PMI-300(W) | 2.0 TO 2.5 TPH | 60 HP Main Motor |
4 | PMI-420 | 4.0 TO 5.0 TPH | 125 HP Main Motor |
5 | PMI-420(W) | 5.0 TO 6.0 TPH | 125 HP Main Motor |
6 | PMI-520 | 7.0 TO 8.0 TPH | 150 HP Main Motor |
7 | PMI-520(W) | 8.0 TO 10.0 TPH | 150 HP Main Motor |
The Capacity of Pallet Mill offered is based on the feed Formula Following | |
1) 0113.5 % | 2) Protein 21 % |
3) Sandsilica less than 3.5 % | 4) Fiber less than 10 % |
|
|
![]() |
PARAGON MECH INDUSTRIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |